| MODEL |
C0630 |
C0630D DELUXE |
| (mm)Swing Over Bed |
300 |
300 |
| (mm)Distance Between Centres |
900 |
900 |
| (mm)Spindle Bore |
38 |
38 |
| (mm)Swing In Gap |
450 |
450 |
| (mm)Swing Over Cross-slide |
180 |
180 |
| Digital Readout System Fitted |
Optional |
Yes |
| Quick Change Toolpost Fitted |
Optional |
Yes |
| Leadscrew Covers Fitted |
no |
Yes |
| Coolant System |
Yes |
Yes |
| (mm)Tool Height To Suit |
12 |
12 |
| (mm)Centre Height |
150 |
150 |
| Spindle Nose Size or Type |
D1-4 Camlock |
D1-4 Camlock |
| (mm)Bed Width |
180 |
180 |
| (MT)Headstock Spindle Taper |
5 |
5 |
| (MT)Tailstock Taper |
3 |
3 |
| (mm)Cross Slide Travel |
170 |
170 |
| (mm)Compound Slide Travel |
75 |
75 |
| Leadscrew Type |
Imperial |
Imperial |
| (inch/rev)Imperial Cross Feed (X-Axis) |
0.009 - 0.236 |
0.009 - 0.236 |
| (inch/rev)Imperial Longitudinal Feed (Z-Axis) |
0.04 - 1.2236 |
0.04 - 1.2236 |
| (No. / mm)Metric Thread Steps & Pitch |
32 (0.4 - 7) |
32 (0.4 - 7) |
| (No. / TPI)Imperial Thread Steps & TPI |
36 (4 - 60) |
36 (4 - 60) |
| (mm)3 Jaw Chuck Diameter |
160 |
160 |
| (mm)4 Jaw Chuck Diameter |
200 |
200 |
| (No. / rpm)Spindle Steps / Speeds |
18 (65 - 1810) |
18 (65 - 1810) |
| (kW / hp)Motor Power |
1.5 / 2 |
1.5 / 2 |
| (V / amp)Voltage / Amperage |
240 / 10 |
240 / 10 |
| (cm)Shipping Dimensions (L x W x H) |
168 x 76 x 145 |
168 x 76 x 145 |
| (kg)Nett Weight |
595 |
595 |
| Standard accessories |
|
|
|
3-jaw chuck with reverse jaws |
|
|
| 4-jaw chuck |
|
|
| Face plate |
|
|
| Fixed steady |
|
|
| Travelling steady |
|
|
| Coolant system |
|
|
| Change gears |
|
|
| Dead centres |
|
|
| Thread-chasing dial |
|
|
| Safety chuck guard |
|
|
| Work light |
|
|
| Stand |
|
|
| Foot brake |
|
|
| Rear splash guard & slide out swarf tray |
|
|
| Tool box |
|
|
| Instruction booklet
|
|
|
)